- 1 Introduction
- 2 Features
- 3 Package contents
- 4 Specification
- 4.1 M200 V2
- 4.2 Control equipment (GL900A)
- 4.3 Lower sensor system
- 4.4 Front Sensor System
- 4.5 Upper Sensor System
- 4.6 Smart Battery (TB55)
- 4.7 Charger (IN2C180)
- 4.8 Charging hub (IN2CH)
- 4.9 M210 V2 / M210 RTK V2
- 4.10 Control Equipment (GL900A)
- 4.11 Down Sensor System
- 4.12 Front Sensor System
- 4.13 Upper Sensor System
- 4.14 Smart Battery (TB55)
- 4.1 5 Charger (IN2C180)
- 4.16 Charging hub (IN2CH)
- 5 Appearance
- 6 DJI SkyPort Adapter
- 7 Payload
- 8 AES-256 Encryption
- 9 Mobile SDK
- 10 BC Manifold 2
- 11 RTK modules
- 12 External GPS module
- 13 D-RTK Mobile Station 2
- 14 TimeSync
- 15 OcuSync 2.0
- 16 FPV FPV camera
- 17 Signal lights
- 18 DJI AirSense
- 19 Descreet Mode
- 20 FlightAutonomy
- 21 Power
- 21.1 Self Heating
- 22 Controls
- 23 DJI Pilot PE
- 24 DJI FlightHub
- 25 Application [9 1]
- 26 Videos
Introduction
February 21DJI InnovationscommercialMatrice. The DJI Matrice 200 Series V2 is a versatile aerial performance platform that combines rugged construction and easy configurability for a variety of industrial applications. Improvements in the M200 V2 series include intelligent control systems, flight performance, and added safety and data protection features.
Features
- Foldable beam and rotor design
- Removable landing feet
- Degree of protection IP43
- 6 payload options (Zenmuse X4S / X5S / X7 / XT / XT2 / Z30)
- Compatible with DJI SkyPort adapter
- Top mount for stabilizing gimbal camera
- Compatible with 3rd party payload
- Data encryption AES-256
- Compatible with mobile SDK
- Compatible with embedded SDK (for Matrice 210 V2 and Matrice 210 RTK V2)
- On-board computer Manifold 2
- Built-in high performance RTK modules (for Matrice 210 RTK V2)
- Compatible with D-RTK 2 mobile station
- TimeSync correction system
- OcuSync 2.0 transmission system
- FPV FPV camera
- FlightA obstacle sensing system utonomy
- Signal Lights
- DJI AirSense
- Descreet Mode
- Satellite Positioning GPS / GLONASS / BeiDou / Galileo
- External Module GPS
- Max. level flight speed 81 km / h
- Max. flight time 38 minutes
- Max. FPV Distance 8km
- Max. flight altitude above sea level 3 km
- Max. payload weight 1.45kg
- Battery heating
- Cendence S control equipment in tandem with DJI CrystalSky monitor
- DJI Pilot PE mobile app
- Flight web center DJI FlightHub
- Operating temperature range from -20 ° С to 50 ° С
Package contents
a DJI dealer, or send your contact information to the DJI team through the official website so they can contact you.
Specification
M200 V2
Control equipment (GL900A)
Lower sensor system
Control equipment (GL900A)
Lower sensor system
Encryption AES-256
The Advanced Encryption Standard (AES) is a symmetric block encryption algorithm (128 bit block size, 128/192/256 bit key) adopted as the encryption standard by the US government. Provides secure transmission of data during operation of DJI drones.
Mobile SDK
The Matrice V2 200 Series is compatible with the DJI Mobile SDK, giving the user direct access to drone functions for later automation and customization via a mobile device.
BC Manifold 2
Manifold 2 is the second generation of a high-performance onboard computer specially designed for the DJI Onboard SDK. Allows enterprise users to transform aerial platforms into intelligent flying robots that can perform complex computing tasks and advanced image processing on the fly.
RTK modules
To increase the absolute accuracy of image metadata, the M210 RTK V2 integrates RTK modules providing real-time centimeter accuracy positioning the received data.
Without RTK modules, the UAV requires up to 40 ground control points (GCPs) per square kilometer, which is time-consuming in practice. The Matrice 210 RTK V2 has a built-in centimeter-precision RTK positioning navigation system coupled with a high-performance imaging system. Tandem potentially reduces the number of breakpoints required for "0", saving at least 75% of setup time.
External GPS module
Improves positioning accuracy, especially when using an overhead gimbalon the M210 V2 or when connecting onboard devices or payloads.
D-RTK 2 Mobile Station
Matrice 210 RTK V2 is fully compatible with the D-RTK 2 Mobile Station responsible for providing drone differential data in real time and the formation of an accurate geodetic solution. The rugged D-RTK 2 design, IP67 protection, coupled with the OcuSync 2.0 video transmission system, ensures users receive centimeter-accurate data even in difficult conditions.
PM210 RTK V2 can be easily implemented in any workflow by connecting the positioning system to the D-RTK 2 mobile station using a 4G dongle or Wi-Fi point using the NTRIP protocol (streaming differential GPS data over the Internet), or you can save all the received data for subsequent processing using the post-processing kinematic method (PPK - Post Processing Kinematic).
TimeSync
TimeSync is an accurate data collection system that provides continuous alignment of the flight controller, camera and RTK modules. In addition, TimeSync ensures that every photo uses the most accurate metadata and captures it in the APS-C center, which in turn optimizes the results using photogrammetric methods, allowing the image to match the positioning data at the centimeter level.
OcuSync 2.0
The second generation of digital video transmission technology OcuSync, thanks to the ability to switch between 2.4 GHz and 5.8 GHz frequencies based on the channel load, improved immunity to interference, providing at the output, the removal distance is up to 8 km, the quality of the video stream is up to 1080p, the download speed is up to 40 Mbps and the latency time is up to 120 ms.
FPV FPV camera
Allows you to separate the responsibilities of the pilot and operator. Now the pilot can concentrate on more precise control of the drone, and the operator on getting the right frames. Video streams do not overlap and therefore do not interfere with each other.
Beacon Lights
Matrice V2 drones are equipped with up and down beacons to provide protection against collisions at night or in low visibility conditions, making it safer to operate in adverse conditions...
DJI AirSense
Thanks to the built-in ADS-B receiver, DJI AirSense technology improves the safety of airspace by automatically providing the operator with real-time information about the nearest aircraft.
Descreet Mode
Invisible Mode - disables all aircraft side illumination for missions requiring inconspicuous movement, especially in night hours.
FlightAutonomy
The robust FlightAutonomy system with forward, downward and upward sensors detects and avoids obstacles while providing precise hover for confident piloting.
Power supply
Matrice V2 200 series is powered by two intelligent lithium polymer rechargeable batteries - TB55. The main characteristics of each: 6S 22.8V 7660mAh 174.6 Wh. According to the specification, paired operation provides a maximum flight time of 38 minutes.
Self-heating system
Provides optimal battery temperature when operating at low temperatures down to -20 ° C.
Control
Control of drones is realized through the new control equipment - Cendence S (GL900A) working in conjunction with a 7.85-inch monitor - DJI CrystalSky; with a resolution: 2048 × 1536; brightness: 2000 cd / m²; OS: Android 5.1; Memory: ROM 128GB. Tandem provides multifunctional UAV control. The equipment operates in the frequency range: 2.4000 - 2.4835 GHz; 5.725-5.850GHz. Max. FPV removal distance - 8km. Power is supplied from a smart battery with a larger capacity WB37 (7.6V 4920mAh).
DJI Pilot PE
DJI Pilot PE (Private Edition) is a customized version of the flight control application designed specifically for corporate users presentinghigh requirements for data security, which allows you to maximize the potential of commercial UAVs laid down by the manufacturer. By default, DJI Pilot PE will not transmit any data to public networks and will only connect directly to the FlightHub Enterprise hosted on the user's private IT infrastructure.
DJI FlightHub
DJI FlightHub is a web center for coordinated management of DJI drone fleets. Allows the operator to receive live telemetry from each drone involved in the mission, view up to four video streams simultaneously in real time, coordinate and manage the entire workflow online. The service is accessible via a web browser. In addition to the existing versions of FlightHub Basic and Advanced, the developer presented a new version of the software - FlightHub Enterprise. The software has received additional features that will give commercial operators more control over the drone workflow and data protection:
- Private Cloud Hosting - Organizations can now host FlightHub Enterprise on their private cloud or on-premises IT infrastructure. leveraging their existing organizational resources and security protocols, and create streamlined workflows for their drone fleet.
- Software Management - Centralized management and deployment of UAV software updates that allow organizations to certify and update drone fleets at their own pace, ensuring security compliance and avoiding unexpected delays during critical missions.
- Flight Planning - Plan and monitor unmanned operations with the ability to send automated waypoints or map missions to individual pilots.
- Device Maintenance - Track equipment usage, including drone and battery usage, to ensure that your drone fleet is functioning properly and maintenance is on schedule.
Application
DJI Matrice 200 Series V2 will be indispensable in such areas of human activities as search operations, aerial monitoring, forensic medical examination, inspection of high-rise objects, identification of defects, cartography, geodesy, emergency situations, planning and management of work processes.
Video
Video instructions for launching DJI Matrice 200 Series V2 from the developer.
Video instruction for calibrating the center of gravity DJI Matrice 200 Series V2 from the developer.
Video instruction on linking Cendence S (GL900A) control equipment to DJI Matrice 200 Series V2 drones from the developer.
Video instruction on setting up the D-RTK 2 mobile station from the developer.
.