SPC Maker Mini Whale HD: A powerful cinewhoop for indoor and outdoor use.

About the product

More one version of a high-quality racing micro drone which, in our opinion, is worth paying attention to if you are just starting to learn the UAV racing niche

Model 2019. It is implemented by the developer in two versions: with a regular FPV camera RunCam Robin (for the SPC Maker Mini Whale model) and a hybrid RunCam Split Mini 2 (for the SPC Maker Mini Whale HD model), which allows you to simultaneously act as an onboard FPV WDR camera and perform high-quality FHD at 60 frame / s shooting with recording on a preinstalled microSD card. Otherwise, both quadrics are identical. Since the release, both versions have proven themselves exclusively from the best side, but the version with a hybrid camera has received the most popularity. By tradition, let's start with the key features of the model.

Features

  • Weight without battery (Mini Whale / Mini Whale HD): 52/60 g
  • Drone dimensions: 95 × 112 × 40 mm
  • Frame size: 78 mm
  • Materials of execution: Polypropylene / 3K carbon 1.5mm
  • Flight controller: MICRO F4 (firmware OMNIBUS F4SD)
  • ESC: MICRO 12A 4-in-1 (2-3S LiPo)
  • Motors: Used 1103 10000KV
  • Propellers: 4-blade GEMFAN 1636 41mm
  • FPV Camera (Mini Whale / Mini Whale HD): RunCam Robin / RunCam Split Mini 2
  • FPV camera tilt angle adjustable 0-30 °
  • VTX: TX15: 40ch 5.8 GHz with a switchable power of 25/100 mW (available for both versions); TBS UNIFY PRO32 NANO: 37ch 5.8GHz with 25/100/400 mW switchable power (available only for Mini Whale HD version)
  • Receiver (optional): Frsky / DSMX / Flysky / Futaba
  • Smart Audio communication protocol
  • Recommended battery: 11.1V 350 mAh 30C LiPo with XT30 connector

Package

The developer offers both versions in PNP configuration

Kit

  1. Drone assembly
  2. 2 × spare ring guards with fixing screws
  3. 4 × spare carriers Propeller (2CW / 2CCW)

Specification

Drone

Brand:
SPC Maker
Model:
Mini Whale (HD)
Materials of execution:
Polypropylene / 3K carbon 1.5 mm
Weight (without battery Mini Whale / Mini Whale HD):
52/60 gr
Frame size:
78 mm
Size drone:
95 × 112 × 40mm
Motors:
1103 10000KV

Propellers

Brand:
GEMFAN
Name:
1636 40mm 1.5mm
Material used neniya:
polycarbonate
Weight:
0.61 g
Quantity blades:
4
Pitch:
3.5 inches
Diameter:
40.8 mm
Inner diameter:
1.5 mm
Thickness:
5.2 mm
Blade width:
7.46 mm
Motor adaptation:
1103

Flight controller

Dimensions:
24 × 24 mm
Hole spacing:
20 × 20 mm
FC:
MICRO F4
Firmware:
OMNIBUS F4SD
Power:
2-5S LiPo
BEC:
5.1V @ 3A
Smart Audio:
​​
yes

ESC

Type:
MICRO 4-in-1 12A (2-3S LiPo)
Dimensions:
24 × 26mm
DC Current:
15A
Peak current:
15A ⩽10S
Input voltage:
2S-3S LiPo
BEC:
none
Firmware:
BLHeli_S (QH- 10)
Input signal:
PWM, OneShot125, OneShot42, Multishot, Dshot150 / 300/600

RunCam Robin

Weight:
5.5g
Dimensions (L / W / H):
19 × 19 × 18 mm
Matrix:
1 / 3- inch 120dB WDR CMOS
Horizontal Resolution:
700TVL
Lens:
1.8 mm (M8); viewing angle 160 °; 2.1 mm (M8), 145 ° FOV (optional)
Latency:
6 m / s (minimum)
TV Mode:
NTSC / PAL switchable
Signal to Noise Ratio:
Shutter:
Auto
Min. Illumination:
0.01Lux @ 1.2F
WDR:
120dB
DNR:
2DNR
Day / Night:
Color / Black