Introduction
The developer EmaxTinyhawk" (TinyhawkTinyhawk S or Tinyhawk 2), the potential of which will be appreciated by pilots of all skill levels from amateur to professional. Emax Tinyhawk II Race is a high-quality FPV ToothPick drone built on a super-strong carbon frame with a diagonal of 90 mm with a powerful power plant and no less powerful electronic stuffing in the AIO (All-In-One) format. If you do not know where to start your way in the racing niche or are looking for an adrenaline solution to hone your already acquired skills, then the presented model at least deserves your attention. By tradition, let's start with the key features of the drone.
Features
- X-frame made of aerospace grade 3K carbon fiber
- Canopy material: polypropylene
- Size diagonal: 90 mm
- Weight without battery: 47.5 g
- Flight weight: 73 g including 2 × battery
- Flight controller in AIO format: F4 (firmware MATEKF411RX)
- Receiver: EMAX SPI Receiver (compatible with FrSky D8 mode)
- ESC: 4-in-1 5A BlHeli_S
- Motors: 1103 7500KV
- Propellers: 3-blade 2-inch Avan Blur with T-mount
- Power: 2 × EMAX 1S 450 mAh HV LiPo battery with JST-PH2.0 Duo connector
- FPV Camera: RunCam Nano 2 1/3 ″ 700TVL CMOS
- VTX: 37ch (including Raceband) 5.8GHz VTX with 25/100/200mW switchable power
- Smart Audio Communication Protocol connected
Options
Offered by the developer in a single BNF kit tions:
- Tinyhawk II Race
- 2 × EMAX 1S 450 mAh HV LiPo battery
- 1S USB LiPo charger (for simultaneous charging 6 × battery)
- Screwdriver spare mounting kit
- Transport case
Appearance
Appearance of the Tinyhawk II Race model.
Innovative Power System
The Tinyhawk II Race's power system is tuned for speed and performance. Thanks to the 1103 7500KV brushless motors used, the required rpm has been achieved to obtain the best power-to-weight ratio. And the tandem with 2-inch 3-blade AVAN Blur propellers has allowed to cope with excess power in favor of increasing total flight time, thereby providing the pilot with a longer, faster and more stable flight.
Carbon Fiber
One of the key elements in adapting the Tinyhawk II Race for high speed environments was the frame design. Through the use of aerospace-grade 3K carbon fiber, combined with a reinforced and aerodynamically designed center guard, maximum durability has been achieved for all elements of the drone without sacrificing flight performance.
Enhanced Video System
The Tinyhawk II Race maximizes the performance of the enhanced video transmission system through an adjustable power range, giving pilots more freedom and range. than ever before. Building on their experience, the engineers have used the proven Runcam Nano 2 FPV camera for its extended dynamic range, controlled exposure and image quality to achieve the best video quality possible.
Price
The Tinyhawk II Race drone is sold by the developer through its own Internet resources, as well as through various Internet trading platforms at a price of 115 $ (excluding shipping and taxes).
Video
Test flight of the Tinyhawk II Race drone.
.
