Introduction
Beta75X Lumenier Edition - Has the same astounding power and controllability as a standard nano drone - Beta75X
Features
- PC based on STM32F405 with built-in OSD (firmware OMNIBUSF4SD 3.5.0)
- Used motors 1103 11000KV with JST -PH 2.0 connector
- 10A ESC BLHeli_S Dshot600 (2S LiPo)
- 4-blade 40mm propellers
- FPV camera Z02 AIO VTX with built-in 40-channel 5.8GHz VTX 0 / 25 / 200mW
- Micro AXII antenna
- Smart Audio port
- Max. camera tilt angle - 35 °
- Luminescent coating on all plastic elements of the drone
- Weight (without battery) - 45g
Package Contents
Beta75X Lumenier Edition is available for purchase only in PNP version which will include:
- Beta75X PNP 2S Whoop Quadcopter
- 4x4 -blade 40mm rotors (2CW / 2CCW)
- 1 × Battery BetaFPV 2S 350mAh 35C-70C with XT30 connector
- 1 × Spare Canopy
Specification
Drone
PC
ESC
Z02 AIO Camera VTX
Appearance
Power supply
The Beta75X Lumenier Edition is powered by 2S 350mAh 35C-70C with XT30 connector. You can also order a drone with the classic PH2.0 connector
Price
Beta75X Lumenier Edition is still available for purchase exclusively in the developer's online store at a price of $ 139.99. The standard version is available at a similar price on all well-known marketplaces.
FAQ
Q. About the LEDs on the back of the Beta75X. A. PC is now updated to V1.2. Can support programmable LEDs like WS2812, etc. The LED holder was designed for the 75X frame. There is no LED holder included by default.
Q. I want to connect my HD camera and DVR, but I don’t want to overload the 5V circuit. A. The flight controller's 5V regulator can handle a 2A load.
Q. Does this drone have a current sensor? A. This drone has no real current meter. We are using a virtual current meter in BETAflight. If properly calibrated, it can be reasonably accurate. Here is the pre-calibrated value:
set current_meter = VIRTUAL set ibatv_scale = 90 set ibatv_offset = 29
Q. How do I connect the receiver to my PC? O. For details on reference.
Video
Video with the standard version of the Beta75X drone.
.
